Who Needs This Stand
-
Second-Machine Operators — If you're running two foam cannons at the same event (a Maxx on one side, a Pro-X on the other), you need a second stand. The Maxx ships with its own telescopic stand, but this universal stand gives your second machine the same elevated positioning. Two elevated cannons from opposing angles = full zone coverage with no dead spots on the ground.
-
Replacement for a Damaged Stand — Stands take abuse. They get knocked over, driven over, dragged across parking lots, and stored wet in trailers. If your original stand is bent, the hydraulic cartridge is failing, or the legs won't lock anymore, this is a direct replacement that matches the spec of the stand included with the Foam Blaster Maxx.
-
Pro-X Owners Who Need Elevation — The Foam Blaster Pro-X in cannon mode benefits dramatically from height. At ground level, the cannon fires into the crowd at chest height. At 6+ feet on this stand, the cannon fires over the crowd and foam cascades down across the full depth of the event space. Even in ooze mode, elevation changes the foam's fall pattern — pouring from height creates a more dramatic cascading effect.
-
Rental Operations — Stands are the component most likely to come back from a rental in worse shape than it left. Having spare stands means a bent or malfunctioning return doesn't take a machine out of your rental fleet. Swap the stand, keep the machine in rotation.
-
Any Foam Machine with a 35mm Pole Mount — The universal 35mm (1-3/8") adapter pole fits standard mounting brackets used across professional foam machines, speaker mounts, and lighting fixtures. If your foam machine bracket accepts a 35mm pole, this stand works.
💡 Height Matters More Than You Think: A foam cannon at 3.5 feet fires into the front of the crowd. The same cannon at 6.5 feet fires over the front of the crowd and covers the full depth of the foam zone. The difference in coverage area is dramatic — going from ground level to full stand extension can more than double the effective reach of your foam cannon. If your foam isn't reaching the back of the crowd, the first fix is more height, not more power.
Air-Assisted Hydraulic Lift — One Person, One Hand
The stand uses an internal air cartridge — the same pneumatic technology used in professional speaker stands, stage lighting rigs, and broadcast equipment. The cartridge stores compressed air that provides the lifting force, so you're not muscling a 30+ pound foam cannon up to 6.5 feet by hand.
To Raise
Step 1: Mount your foam cannon and mounting bracket on the pole.
Step 2: Loosen the locking knob on the center pole.
Step 3: Press the hand clutch downward — the air cartridge lifts the pole (and the cannon) smoothly upward.
Step 4: When the cannon reaches your desired height, release the clutch and tighten the locking knob. The pole locks in place.
To Lower
Step 1: Loosen the locking knob.
Step 2: Pull the pole downward gently — the air cartridge provides controlled hydraulic resistance, so the cannon descends slowly and safely rather than dropping.
Step 3: Remove the cannon from the pole.
The entire raise/lower cycle takes about 15 seconds. No cranking, no manual lifting, no second person needed. The built-in pole track mechanism prevents the pole from rotating during lift, so the cannon stays aimed where you pointed it as it rises.
💡 Why Air-Assisted Matters: A loaded Foam Blaster Maxx weighs roughly 50 lbs with the barrel, mount, and hardware attached. Manually lifting 50 lbs to 6.5 feet overhead — repeatedly, at multiple events per week — is a back injury waiting to happen. The air cartridge does the lifting. You just press the clutch and guide it. This is an ergonomic safety feature disguised as a convenience feature.
Height Range
42" – 79" (3.5 ft – 6.6 ft)
Lift System
Air-assisted hydraulic (push-button raise, controlled lower)
Pole Diameter
35mm (1-3/8") — universal adapter
Construction
Steel and aluminum composite
Base Type
Tripod (folding legs)
Pole Track
Built-in anti-rotation track
Locking
Locking knob (secures at any height)
Foam Blaster Maxx
✓ Direct fit (same stand included with Maxx)
Foam Blaster Pro-X
✓ Compatible with Pro-X mounting bracket
Other Equipment
Any 35mm pole-mount bracket (speakers, lights, etc.)
The Elevated Foam Rig
Foam Blaster Maxx v2 →
The flagship foam cannon. At full stand extension (79"), the Maxx's tapered barrel fires foam over the crowd and covers the full depth of a 30×40 ft zone. The Maxx ships with its own telescopic stand — this listing is the same stand sold separately for operators running multiple machines or needing a replacement.
Foam Blaster Pro-X →
The convertible foam machine. In cannon mode, elevation dramatically improves projection range and area coverage. In ooze mode, elevation creates a more dramatic cascading waterfall effect as thick foam pours from 6+ feet and stacks on the ground below. The Pro-X mounting bracket fits the 35mm pole directly.
Utility Pump →
Keeps the foam solution flowing from barrel to cannon while the cannon sits elevated overhead. The pump's 25-foot max vertical lift specification is well within the stand's 6.6-foot maximum height — plenty of pressure to push solution up to the cannon at full extension.
Foam Solution — Ready to Run →
The solution that keeps the cannon running. Mix 75:1 with water in the barrel, connect the pump, and feed the elevated cannon. Properly mixed solution through a clean machine on an elevated stand = maximum foam range and density.
200W Blacklight 2-Pack →
With the cannon elevated, the foam has further to fall — which means more surface area reflecting UV light. Position blacklights at opposing angles below the elevated cannon, and the falling foam creates a glowing cascade effect as it drops through the UV field.
Frequently Asked Questions
Doesn't the Foam Blaster Maxx already come with a stand?
Yes — the Maxx includes a telescopic stand in the box. This is the same stand sold separately for operators who need a second stand (running two machines), a replacement for a damaged stand, or a stand for a Pro-X or other compatible foam machine that didn't ship with one.
Does it work with the Foam Blaster Pro-X?
Yes. The 35mm universal pole fits the Pro-X mounting bracket. The Pro-X benefits significantly from elevation in both cannon mode (more projection range) and ooze mode (more dramatic cascading effect from height).
How much weight can it hold?
154 lbs. A fully loaded Foam Blaster Maxx with barrel, mount, and hardware weighs roughly 50 lbs — well within the stand's capacity. You have more than 100 lbs of headroom, which means the stand won't flex, wobble, or struggle under the weight and vibration of a running cannon.
Is it stable during operation?
Yes. The wide tripod base spreads up to 23 inches for a broad, stable footprint. The locking knob secures the pole at your desired height, and the built-in pole track prevents rotation, so the cannon stays aimed where you set it even under motor vibration. On soft surfaces (grass, sand), press the tripod feet firmly into the ground for additional stability. On hard surfaces (concrete, pavement), the rubber foot pads grip without sliding.
How does the air lift work?
An internal air cartridge stores compressed gas that provides upward lifting force. Press the hand clutch and the air cartridge pushes the pole upward — you guide it, the cartridge does the heavy lifting. To lower, release the locking knob and gently pull down — the cartridge provides controlled resistance so the pole descends slowly rather than dropping. No batteries, no electrical power, no manual cranking.
Can the air cartridge wear out?
Air cartridges have a long service life under normal use — typically hundreds of cycles before any reduction in lift force. If the cartridge eventually loses pressure (the pole rises more slowly or requires more manual assistance), the stand is still fully functional as a manual-lift stand — the cartridge just provides less assistance. The stand is covered by the 1-Year Limited Warranty against manufacturing defects.
Can I use this for speakers or lighting?
Yes. The 35mm pole is the industry-standard speaker/lighting stand diameter. Any equipment with a 35mm pole-mount adapter — PA speakers, stage monitors, LED fixtures, moving heads — mounts directly. Between foam events, this stand pulls double duty as a speaker or lighting stand.
How tall should I set it?
As high as the venue allows. For foam cannons, higher = better coverage. At maximum height (79" / 6.6 ft), the cannon fires over the crowd and foam covers the full depth of the zone. At minimum height (42" / 3.5 ft), the cannon fires at approximately chest level — useful for direct-hit effects or smaller spaces, but less effective for area coverage. For most foam parties, full extension is the right answer.
Can one person set it up?
That's the entire point of the air-assist system. Set up the tripod, mount the cannon on the pole at its lowest position, press the clutch, and the air cartridge lifts the cannon to operating height. No second person needed. Teardown is the reverse: lower, dismount, fold. Total setup/teardown time is under 2 minutes.
Get the Most Out of Your Stand
Go Full Height — Every Time
Unless the venue has a low ceiling or other physical constraint, extend the stand to maximum height (79"). The coverage improvement from 42" to 79" is dramatic. At 79", the cannon fires over the crowd's heads and foam falls across the full depth of the zone. At 42", the cannon fires into the front of the crowd. More height is almost always the right call. If you can position the stand on a stage, platform, or elevated surface, the effective height stacks — a 79" stand on a 24" stage puts the cannon at over 8.5 feet.
Spread the Legs Fully
Open the tripod legs to their full spread before raising the cannon. A wider base = more stability. A narrow base with a heavy cannon at full extension is an invitation for the whole rig to tip. On soft ground (grass, sand, mulch), push the feet in firmly. On hard ground, make sure the rubber pads are making full contact. Never set up on a slope if you can avoid it — if you must, point one leg uphill.
Lock the Height Before Starting the Motor
Tighten the locking knob firmly before you turn the cannon on. The motor vibration at 3,450 RPM can slowly work a loose knob free, and the cannon will gradually lower during operation if the knob isn't secure. One firm twist of the locking knob prevents any drift. Check it once more after the cannon has been running for 30 seconds — vibration can settle things.
Set Aim Before You Raise
It's much easier to adjust the cannon's aim angle and rotation lock at low height (where you can see and reach everything) than at 6.5 feet overhead. Mount the cannon, set the mounting bracket angle, aim the barrel in the desired direction, lock the rotation, then raise. Fine-tune from below if needed, but getting the rough aim right at ground level saves time and neck strain.
Keep It Clean and Dry in Storage
The stand operates in a wet foam party environment. After events, wipe down the pole and legs, and store dry. Foam solution residue on the pole can make the clutch mechanism sticky over time. A quick wipe with a damp cloth after each event keeps the hydraulic lift mechanism operating smoothly for years.
Use It for Other Gear Between Foam Events
The 35mm pole accepts any standard speaker, lighting, or effects mount. Between foam events, this stand works as a PA speaker stand, a lighting stand, or a mount for any other 35mm-compatible equipment. One stand, multiple uses — if you're already hauling it to events, make it work for more than just foam.
