Replacement Nozzles (Only for use with Foam Blaster Maxx and Pro-X)

What These Nozzles Do

The nozzles mount inside the foam machine barrel and spray foam solution outward in a full 360° pattern across the netting. This is what creates the foam — solution hits the netting, air passes through, and foam billows out. The nozzle's spray pattern and flow rate directly affect foam volume and consistency.

When to Replace

Symptom	Likely Cause
Reduced foam output	Nozzle clogged with residue or debris
Uneven spray pattern	Nozzle cracked or partially blocked
Weak or thin foam	Worn nozzle not distributing solution properly across netting
Visible damage	Cracked housing or broken spray insert

What's Included

• 2× replacement spray nozzles

Compatible Machines

• Foam Blaster Maxx V2
• Foam Blaster Pro-X

Nozzle Specifications

Specification	Detail
Quantity	2 nozzles per pack
Spray Pattern	Full circle (360°)
Spray Radius	Up to 15 ft
Connection	½" FNPT (female thread)
Material	Plastic
Filter	Built-in debris filter to prevent clogs
Flow Adjustment	Screw adjustment for spray distance and flow rate
Compatibility	Foam Blaster Maxx V2 and Pro-X only

Key Design Features

• Built-in filter — Prevents foam solution residue and debris from clogging the nozzle
• Flow adjustment screw — Dial in spray distance and volume for your specific setup
• Full 360° pattern — Even solution distribution across the entire netting surface
• Tool-free install — Threads on by hand in seconds

How many nozzles come in a pack?

Two. Each pack includes 2 replacement nozzles.

Will these fit my foam machine?

These nozzles are only compatible with the Foam Blaster Maxx V2 and Foam Blaster Pro-X. They will not fit other brands or models.

How often should I replace the nozzles?

There's no fixed schedule — it depends on usage. If you notice reduced foam output, uneven spray, or visible cracks, it's time to swap. Operators running frequent events should inspect nozzles before each use and keep a spare set on hand.

How do I install them?

The nozzles thread on by hand — no tools required. Unscrew the old nozzle, thread on the replacement, and you're ready. Takes seconds.

Can I clean clogged nozzles instead of replacing them?

You can try soaking a clogged nozzle in warm water and clearing debris from the built-in filter. But at $8.99 for a 2-pack, it's often easier and more reliable to just swap in a fresh one — especially mid-event when time matters.

Do the foam machines come with nozzles?

Yes — both the Maxx V2 and Pro-X ship with nozzles installed. These are replacements for when the originals wear out or get damaged.

Always Carry Spares

At $8.99 for two, there's no reason not to keep a backup set in your gear bag. A cracked or clogged nozzle at an event means reduced foam output — a 10-second swap fixes it instantly.

Inspect Before Every Event

Before each gig, unscrew the nozzles and check for cracks, buildup, or debris in the filter screen. A quick visual inspection takes 30 seconds and prevents surprises during the show.

Flush Your System After Each Use

Running clean water through the machine after every event helps prevent residue buildup inside the nozzles. This extends nozzle life and keeps the spray pattern consistent. Use with the recommended foam solution to minimize buildup.

Adjust the Flow Screw

The nozzles have a built-in flow adjustment screw that controls spray distance and volume. If you're getting too much splash or not enough coverage, try dialing the screw in or out before assuming the nozzle needs replacing.

Pair with Your Foam Setup

• Foam Blaster Maxx V2 — High-volume foam cannon
• Foam Blaster Pro-X — Convertible cannon + ooze
• Replacement Netting (White) — Fresh netting for the Maxx V2
• Replacement Netting (Black) — Black netting option
• Foam Solution — Standard foam fluid concentrate
• All Parts & Accessories — Browse the full catalog