SurgeFX Cyclone - Twin Rotor Fog Bubble Machine

Bubbles + Fog-Filled Bubbles

The Cyclone gives you two modes: bubbles only (fog off) and fog-filled bubbles (fog on). Turn the fog off for a classic high-volume bubble stream — great for kids' events, photo ops, and lighthearted moments. Turn the fog on and the 1500W fogger fills each bubble with dense smoke, creating translucent orbs that drift through the air, glow under the RGBW LEDs, and release a burst of fog when they pop. It's the same crowd-stopping fog-filled bubble effect that makes the Cosmos series a production favorite, packed into a smaller, lighter, more affordable machine.

Twin-Rotor Design

Instead of the multi-nozzle design found on the Cosmos machines, the Cyclone uses a twin-rotor (double wheel) system. Two spinning wands continuously rotate through a built-in bubble solution reservoir, picking up fluid and producing bubbles as the fog passes through them. This creates a dense, continuous torrent of fog-filled bubbles rather than individual streams from separate nozzles. The result is high-volume output from a compact, mechanically simple machine.

16-Foot Range

The Cyclone launches bubbles and fog-filled bubbles up to 16 feet from the machine. That's enough to reach across a dance floor, fill a ceremony aisle, or send a cascade of glowing fog bubbles over a crowd from stage edge.

18 RGBW LEDs

18 × 3W RGBW 4-in-1 LEDs illuminate the fog-filled bubbles as they leave the machine, washing them with color. Red, green, blue, and white channels give you full color mixing. In a dark or low-light environment, the effect is dramatic — hundreds of glowing, smoke-filled orbs drifting through colored light.

Who It's For

Mobile DJs, wedding planners, event companies, photographers, school dances, churches, corporate events, and performers who want professional-looking bubble and fog-filled bubble effects in a portable, affordable package. The Cyclone is the entry point into the SurgeFX bubble lineup — if you need larger coverage, independent fog-only output, and production-grade performance, see the Cosmos² and Cosmos⁴.

Two Modes: Bubbles + Fog-Filled Bubbles

With the fog turned off, the Cyclone produces a high-volume stream of plain bubbles from the twin-rotor system — classic, lightweight bubbles lit by the onboard RGBW LEDs. Great for kids' events, photo shoots, parties, and any situation where you want the bubble effect without fog.

With the fog turned on, the 1500W heating element vaporizes fog fluid into dense smoke, which is routed through the twin-rotor bubble system. As the spinning wands create bubbles, the fog gets trapped inside each one. The result is fog-filled bubbles — translucent, smoke-filled orbs that float through the air and release a visible puff of fog when they burst. Under the RGBW LEDs, the fog-filled bubbles glow with color as they drift. When they pop on contact with skin, clothing, or surfaces, the trapped fog escapes and curls downward, creating brief wisps of colored smoke before dissipating.

Twin-Rotor Mechanism

The Cyclone's bubble system works differently from the multi-nozzle Cosmos machines. Two spinning wands (rotors) continuously rotate through a built-in reservoir of bubble solution at the base of the machine. As each wand passes through the fluid, it picks up a film of bubble solution. The fog output from the 1500W heater blows through these wands, inflating the film into fog-filled bubbles that are launched into the air. The twin-rotor design produces a high-volume, continuous stream — both wands work simultaneously, so there's no gap in output as one wand dips while the other produces.

RGBW LED System

18 × 3W RGBW 4-in-1 LEDs are integrated into the machine and illuminate the fog-filled bubbles as they exit. Full RGBW color mixing (red, green, blue, white) lets you match your event's color scheme or create dynamic color effects. The LEDs transform the fog-filled bubbles from white orbs into glowing, color-saturated spheres — dramatically more visible and visually impactful, especially in dim or dark environments.

Range

The Cyclone projects bubbles up to 16 feet from the machine. The bubbles naturally slow and begin to float as they travel, drifting with ambient airflow.

Technical Specifications

What's in the Box

• SurgeFX Cyclone fog bubble machine (1 unit)
• Wireless remote control
• Power cord

Fluid System

The Cyclone uses two separate fluids — fog fluid and bubble fluid — in two different compartments:

• Fog tank (1 qt / 1L): A sealed tank that feeds the 1500W heating element. Fill with fog fluid only.
• Bubble reservoir (pour-in): An open reservoir at the base of the machine that the twin rotors spin through. Pour bubble solution in to the fill line — the wands dip through it continuously during operation.

SurgeFX Bubble Lineup Comparison

Setup

1. Place the Cyclone on a stable, level surface facing your target area. The machine should be on the ground or a sturdy table — position it so the output faces across the dance floor, aisle, or stage.
2. Fill the fog tank with fog fluid (1 qt / 1L capacity). Do not overfill.
3. Pour bubble solution into the reservoir at the base of the machine, up to the fill line. The twin rotors will spin through this fluid during operation.
4. Connect power (110V) and turn on the machine.
5. Allow the fog heater to warm up — the 1500W heater needs a few minutes to reach operating temperature. An indicator will show when the machine is ready.
6. Trigger the effect via DMX or wireless remote. Run bubbles only (fog off) or fog-filled bubbles (fog on).

Control Modes

• Wireless Remote: Simple, plug-and-play control. Trigger bubble and fog output on demand from across the venue. Ideal for mobile DJs, wedding operators, and situations where you need to fire the effect on cue without being at the machine.
• DMX512: Integrate the Cyclone into your lighting/effects console for programmed cues. Synchronize bubble and fog-filled bubble effects with lighting changes, music drops, and other production elements.

Fluid Guidelines

• Use fog fluid in the fog tank and bubble solution in the bubble reservoir. These are different fluids — do not interchange them.
• Do not use snow fluid, haze fluid, water, dish soap, or any other liquid not specifically formulated for fog or bubble machines.
• We recommend SurgeFX BubbleFX™ Bubble Solution and SurgeFX Nebula™ Fog Fluid.
• The fog tank is a sealed reservoir — check the level before each use. The bubble reservoir is open — monitor the level during operation and top off as needed.
• The 1L fog tank and bubble reservoir are designed for the Cyclone's compact size. For longer events, plan to refill during breaks or set changes.

Maintenance

• After each use, wipe down the exterior and clean any bubble residue from the rotor wands and reservoir area.
• Drain the bubble reservoir after each event — do not leave bubble solution sitting in the machine for extended periods.
• If storing for extended periods, drain the fog tank as well and run the machine briefly to clear the fog lines.
• Keep the fog tank cap sealed when not in use.
• Store in a dry environment.

Frequently Asked Questions

What are fog-filled bubbles?
When the fog is turned on, dense smoke is trapped inside each bubble as the twin rotors spin. The result is translucent, smoke-filled orbs that float through the air, glow with RGBW color, and release a visible puff of fog when they pop. Turn the fog off for plain bubbles.

Can I run plain bubbles without fog?
Yes. Turn the fog off and the Cyclone produces a high-volume stream of plain bubbles from the twin-rotor system, lit by the RGBW LEDs. Turn the fog on for fog-filled bubbles. The Cosmos machines add a third mode — independent fog-only output — which the Cyclone does not have.

How far does it shoot?
Up to 16 feet from the machine. The fog-filled bubbles slow and begin to float naturally as they travel.

How is the Cyclone different from the Cosmos machines?
The Cyclone is the entry-level fog bubble machine in the SurgeFX lineup. It's smaller, lighter, more affordable, and produces two effects: plain bubbles and fog-filled bubbles. The Cosmos² and Cosmos⁴ are larger production machines with multi-nozzle designs, three independent effects (bubbles, fog, fog-filled bubbles), larger tanks, more LEDs, and wider coverage — built for bigger venues and professional production.

How does the twin-rotor bubble system work?
Two spinning wands continuously rotate through a built-in reservoir of bubble solution. As each wand passes through the fluid, it picks up a film of solution. The fog from the 1500W heater blows through the wands, inflating the film into fog-filled bubbles. Both wands work simultaneously for continuous, high-volume output.

Does it need two different fluids?
Yes. Fog fluid goes in the sealed fog tank (1 qt). Bubble solution gets poured into the open reservoir at the base. Two different fluids — do not mix or interchange. Both sold separately.

How long does a fill last?
The 1L fog tank and bubble reservoir are compact — designed for the Cyclone's portable size. Run time depends on output intensity, but plan to refill during breaks or set changes at longer events. The bubble reservoir is open and easy to top off mid-event.

Does it have DMX?
Yes. DMX512 for console integration. Also includes a wireless remote for simple plug-and-play operation.

Is the bubble residue messy?
Fog-filled bubbles leave some moisture on surfaces when they pop. The residue is water-based and wipes up easily, but can make floors slippery — plan for light cleanup at indoor events with foot traffic.

Can I use this outdoors?
Yes, but wind will significantly affect bubble drift and fog density. Outdoor use works best in calm conditions or sheltered areas. The machine is not waterproof — do not expose to rain.

How heavy is it?
22 lbs. Compact and portable — one person can carry, set up, and operate it.